Schedule a Call Back
Abaqueâ„¢ Peristaltic Hose Pump
Abaqueâ„¢ Peristaltic Hose Pump
Pumping action is achieved by compression of a circular loop of elastomeric hose with two diametrically opposed rotating shoes. With this rotational motion fluid is pushed ahead inside a hose which is compressed and relaxed by shoes mounted on a rotor. When each shoe reaches the end of the loop, the reinforced tube immediately returns to its original shape, thereby ensuring suction and priming, creating a strong vacuum pulling more fluid inside.
Product & Technology News
ceramic slips, mold filling, filter press, sludge, clay slurry, lime liquor, flocculate dispersion, liquid or fibrous mortar, liquid plaster, light concrete, acid, alcohol, detergent pumping, water base and acrylic paint, pigments, wall coating, etc.
| Max Flow Rate (GPM): | 0.25 |
| Max Flow Rate (LPM): | 0.95 |
| Self-Priming: | Suction lift up to 29 ft (8.8 m) |
| Max Motor RPM (rpm): | 37 |
| Motor Enclosure Type: | TEFC |
| Power (VAC): | 208 to 230 / 460 |
| Power (Hz): | 60 |
| Power (Phase): | 3 |
| Power Conduit Box Connection: | Yes |
| Wetted Materials: | Natural Rubber |
| Inlet Connection: | 10 mm Nipple |
| Particulates, Max size dia (in): | 0.06 |
| Run Dry: | Yes |
| Max Particulates Size Diameter (cm): | 0.15 |
| Max Temperature (° F): | 158 |
| Min Temperature (° F): | 32 |
| Max Temperature (° C): | 70 |
| Min Temperature (° C): | 0 |
| Viscosity, Max (SSU): | 60000 |
| Hose ID (mm): | 10 |
| Motor hp: | 1\3 |
| Description: | Series HDN10 |
- High performance: Seal-less design eliminates leaks and product contamination and have the ability to run dry continuously without adversely affecting the pump’s performance, pressure, and accuracy (no slip).
- Reliability: The Abaque pump has none of the usual parts that create problems on other pumps: seats, valves, mechanical seals. The hose is the only replacement part.
- Handling of the toughest pumping challenges, including extremely abrasive and aggressive fluids, solid loaded liquids, as well as shear sensitive and viscous materials
- Maximum Discharge Pressure: Models 75810-01 through 75810-06 - 109 PSI (7.5 bar); All other models - 232 PSI (16 bar)