Schedule a Call Back
Capacitive Level Sensor
Verified
Verified
Verified
Verified
Verified
Capacitive Level Sensor
Process Control Devices offers Capacitive Level Sensor. Process Control Devices offers a series of liquids level transmitters designed for immersion in open Tanks, Wells, Groundwater and Reservoirs tanks. The capacitive level sensor, Switch, and Transmitter is suitable for level measurement and control of liquids, chemicals, and some slurry. The tank wall and sensor probe form the two electrodes of a capacitor. When the level varies, the electrical capacitance between the electrodes also changes. This change is calculated by the electronics system and converted into an output signal. The performance of these instruments is not affected by the physical properties of the liquid such as density, conductivity, corrosive nature and viscosity.Â
Â
- Tank levels
- Diesel fuel gauging
- Liquid assets inventory
- High or low level alarms
- Remote monitoring
- Irrigation control
- Wet well and pump controls
- Process batch monitoring & control
Â
- Range: 0 to 10 meters (depending upon probe)
- Design Temperature: Up to 85°c
- Design Pressure: Upto 15 Kg/cm²
- Connection: Flanged to ASA, BS, DIN, Screwed BSP/NPT
- Probe Material: SS304, SS304, SS316, SS316L, PTFE INSULATED
- Display: 3 ½ Digit 0.5 “ LED/LCD
- Transmitter output: 4-20 mAmp, 4 WIRE
- Relay output: 1 NO +1 NC
- Supply: 24VDC
- Enclosure: Ex–Proof/ Weather Proof
Â
- Probes can be made out of Teflon or 316 stainless steel and can be adjusted to specific lengths that suit the application
- cable version is also available for distances up to 10 Meters
- Reliable detection even when objects are being fed.
- It can be applied to anything including powder, granules, and liquid.
- Not affected by dust, it can accurately measure the level.
- Safely measure a wide span with the probe design to be strong enough.
- Intrinsically safe design
- Flame proof enclosure