MAC Marketing Corporation offers Rollerscrews

  • Industry News
  • May 27,22
MAC Marketing Corporation offers Rollerscrews which are available in 2 general versions. A Rollerscrew can be equipped with satellite-rollers and is combining a ground screw, a nut and the satellite-rollers.
MAC Marketing Corporation offers Rollerscrews

MAC Marketing Corporation offers Rollerscrews which are available in 2 general versions. A Rollerscrew can be equipped with satellite-rollers and is combining a ground screw, a nut and the satellite-rollers. Both, the screw and the nut have a multithreaded threadprofile with flankangles of 90°. The satellite-rollers are guided by sprockets and kept in a defined distance from each other that way. Rollerscrews are available with and without preload. To protect from dirt or dust, roller- screwnuts can be equipped with wipers made from PA66.

Rollerscrews with roller circulations do not use satellite-rollers. They are using rollers with grooves on their out- side diameter, which are arranged with the distance of the relative pitch. They offer relatively small pitches even with big screw-diameters and achieve high positioning- accuracies and repeatabilities, as well as a high efficiency.

The characteristics of rollerscrews are:

  • High axial load capacity by the use of thread- rollers and the resulting contact areas, as well as the amount of contact points
  • High speed, high acceleration
  • High axial rigidity
  • High positioning-accuracies and repeatabilities with short strokes
  • Dimensions according to customer drawings
  • Travel Variation

    Class

    Variation per 315 mm

    KI 10

    ± 0,01 mm

    KI 5

    ± 0,005 mm

    Preload
    By preloading rollerscrews, a higher rigidity and positioning-accuracy is achieved. At the same time the friction- and startmoment, as well as the lifetime is influenced. Splitted nuts will be preloaded by ground shim rings, which are put between the two nut-halfs. As soon as the nut is affected by axial force the nut-halfs will be pushed together, while the shim rings will then support to control that axial force. Non-splitted nut are preloaded by selecting according sizes of nuts and rollers.

    Temperatures
    The allowable permanent temperature is between -20°C and +80°C. Temporary variations are possible, but should be check in advance.

    Assembly and maintenance
    Rollerscrews are only supposed to handle axial loads. When assembling rollerscrews, it is important to avoid radial or excentric loads or install an extern guide to sup- port those loads. The rollerscrewnut may not be removed from the rollerscrew without an assembly sleeve. To pre- vent damages, limit switches or dampers must be con- sidered in the machine. Rollerscrews are to be protected against dirt.

    Lubrication
    All ballscrews need to be lubricated to ensure proper function. The way and the frequency of lubrication depend a lot on the relevant product. The definition of lubrication-volumes and cycles are very much depending on the application and can be determined by our technical department. The information about grease- and oil-lubrication given below refers to usual industrial applications and is not generally binding. Especially in special cases, i.e. food-industry, high-temperature or high-speed-applications, or short-stroke-applications need to be looked at individually.

    About the company
    MAC, established in 1987, is engaged in the field of Rolling Bearings and allied products including Water Lubricated Bearings, Stainless Steel Bearings, Self – Lubricating Bearings, Slewing Ring Bearings, Ceramic Ball Bearings, Hydrostatic Bearings, Combined Bearings, Rod End Bearings, Wire Race Bearings, and many more, ranging from 1 mm dia up to 7000 mm dia with an experience of 4 decades about the slew bearing in stacker reclaimers, mounting stations, etc.,

    For details, contact MAC Marketing Corporation, Bengaluru, on Tel: +91 80 2351 6096, Mob: +91 98450 18280, or Email: info@macmktg.com

    Related Stories

    Gears, Motors & Drives
    Igus fixed flange bearings become intelligent

    Igus fixed flange bearings become intelligent

    New generation of igubal spherical bearings is equipped with predictive maintenance system.

    Read more
    Other Industrial Products
    FYH Japan introduces all-new range of deep groove ball bearings

    FYH Japan introduces all-new range of deep groove ball bearings

    Since 1950 FYH - the largest manufacturer of mounted bearing units in Japan - has prioritised quality, aiming to offer efficient, precise, and affordable solutions to a diverse array of industries.

    Read more
    Other Industrial Products
    Schaeffler is committed to achieving its carbon neutrality target by 2040

    Schaeffler is committed to achieving its carbon neutrality target by 2040

    In this interview with Rakesh Rao, Seshan Iyer, President - Industrial Business, Schaeffler India Ltd, explains the importance of green engineering & manufacturing practices for India to gain compet..

    Read more

    Related Products

    Bearings

    GEARS, BEARINGS, BELTING & MOTION CONTROL PRODUCTS

    ARB Bearings is a manufacturer of a wide variety of bearings. Read more

    Request a Quote

    Table Bearings

    GEARS, BEARINGS, BELTING & MOTION CONTROL PRODUCTS

    HVD Distributors Pvt Ltd offers flat mounted table bearings. Read more

    Request a Quote

    Gears, Hardened & Ground

    GEARS, BEARINGS, BELTING & MOTION CONTROL PRODUCTS

    Malkar Industries is engaged in manufacturing of hardened and ground worms (single or multi start) on thread grinding machines. Read more

    Request a Quote

    Hi There!

    Now get regular updates from IPF Magazine on WhatsApp!

    Click on link below, message us with a simple hi, and SAVE our number

    You will have subscribed to our Industrial News on Whatsapp! Enjoy

    +91 84228 74016

    Reach out to us

    Call us at +91 8108603000 or

    Schedule a Call Back