• Böllhoff Verbindungstechnik GmbH

Parallel System For Helicoil & Helicoil Plus Installation Tools

Böllhoff Verbindungstechnik GmbH offers a parallel system, type PR-E for helicoil and helicoil plus installation tools. 3-axis parallel system with positioning control: parallel system type PR-E for quick, accurate and manual positioning of the Helicoil plus installation tools. The type PR-E is a universal, flexible, cost-effective positioning system with programmable, user defined position settings. Features: position detection on the X-Y and Z-axes; monitoring of installation depth, installation position and progress of the Helicoil installation process; 10 programs; memory for 25 installation positions per program; control outputs, e.g., for controlling magnetic valves (24DC) for pneumatic clamping devices; the type PR-E is suitable for use with the Helicoil plus installation tool type E-S410. Other benefits: no quality problems caused by forgetting the operating position of the Helicoil plus; installation depth assured; installation faults are recorded. Included in delivery of type PR-E: support arm with positioning control; regulator unit; electrical screwdriver 0.9-3.5 Nm 730 U/min ¼” hex with start lever; operating box; maintenance unit. Accessories: pneumatic tang break-off tool for Helicoil plus; adaptor/control device; Helicoil plus “pick and place” system; the simple handling of the Helicoil plus with shorter assembly times; stationary roll holder for Helicoil plus stripfeed (65000 0182 080 0004); software package: easy-to-use, accurate PC software for teaching the system the installation positions. The X- and Y-axis coordinates can be taken from assembly drawings (where available). The program needs an assembly drawing or a photo of the workpiece where the position of each screwing point is marked. In the operating mode, the installation points are displayed on the workpiece photo as each point is completed. Control unit: control unit for easy programming and loading of screwing points; also manages communications with the PC; control outputs, e.g. for controlling magnetic valves (24DC) for pneumatic clamping devices; and workpiece holder detection with automatic program switching.