• KOBOLD Messring GmbH

Volumetric Flow Meter

KOBOLD Messing GmbH offers volumetric flow measurement with a Fluidistor Oscillator. In this procedure, a partial stream of the medium is led into the measuring cell by means of a bypass. In the measuring cell, the medium flows through a chamber with two flow channels. A gate allows the stream to flow through either the left or the right one. On the side of the gate there is a connecting channel, which connects both sides. The flow creates overpressure on one side and underpressure on the other. The difference in pressure directs the media stream to the other side. This means that the stream between the two sides starts to oscillate which sets the medium in the connecting channel into vibration. The frequency of the oscillation is directly proportional to the flow speed. A detector determines the oscillation in the connecting channel and converts it into an electrical signal. The signal is processed further in the downstream electronic unit and then displayed or output in another form. The devices within the DOG product family are designed for tough industrial use. They are offered in flange or intermediate flange versions up to nominal widths DN 400 in grey cast iron, steel and stainless steel. This means that the equipment can be used for many different applications, from measurement of liquid media of low viscosity, such as for example distilled water, hot water or chemicals up to measurement of gases such as compressed air, natural gas, biogas, fermentation gas, propane, hydrogen gas and many more. Approval by the European ATEX guideline also means that explosive gas streams can be safely measured. As, in contrast to other measuring systems, the oscillation system only requires a low feed pressure and it can also be used in biogas applications where measurement is otherwise extremely difficult.